Here starts the next project:
A classical guitar based on the guitar Hermann Hauser made for Andrés Segovia in 1937. The guitar is in the Metropolitan museum in New York.
Here are the parts, only the ebony fretboard missing from the picture. Indian rosewood back, sides and head veneer, spruce top, cedar neck, Brazilian rosewood bridge. All wood from Liikanen.
Starting by gluing the back.
Traditional classical guitar rosette.
Some details of the rosette. Made out of so small pieces.
Tail block glued. Peg head is waiting for its turn.
And here we are gluing the peg head to correct angle.
Parts for the neck. Peg head veneer is rosewood and fretboard will be ebony.
The braces have been done a bit further, the length and the width are about ready, the height of every brace will be trimmed after gluing the braces.
The braces have been selected so that the grain is symmetrical to the center line of the top.
The first back brace glued.
Shaping of the heel has started.
Same colors to the neck and headstock as on the back strip.
Fan braces glued and starting to plane them.
Fan braces planed and ready for final sanding.
There it is now all braces done.
Tuning machines are fitted and the headstock has got its slots and shape.
The neck is glued to the top.
Back is ready for the next step.
The sides have been bent and now dry fitting, not bad.
All parts are starting to be ready for the next step. Making a guitar out of them.
First the sides are glued to the top.
And finally the back to its place. The box is closed.
Now it starts to look like a guitar.
And again gluing things together.
Bindings and purflings ready, also made a maple heel cap.
Fretboard is ready and glued. Bridge and nut are the last pieces missing.
Bridge is taking steps forward.
Soon is the last gluing step.
A long waited moment, the strings are on, and she plays nicely.
Ok. I’ve put the shellack on the guitar. This was finalized in the spring 2020.